Trailer Tire Guide: ST vs LT, Load Range, Pressure & Speed Ratings

Your Trailer Tire Guide: Why Trailer Tires Are Different From Truck Tires

This trailer tire guide covers everything you need to know. The biggest mistake new towers make with tires is treating them as interchangeable with passenger or light truck tires. They are not. Trailer tires are engineered for an entirely different set of forces. A truck tire is designed to handle acceleration, steering input, and braking — all forces managed by the driver. A trailer tire handles only one thing: vertical load. It carries weight. It does not steer, it does not brake (on many trailers), and it is never supposed to be driven on a road solo.

Understanding this distinction explains every specification that matters: load range, inflation pressure, speed rating, and the ST vs LT debate that causes endless confusion online.

ST vs LT: The Most Important Label on a Trailer Tire

Every trailer tire you consider will be labeled either ST (Special Trailer) or LT (Light Truck). This distinction matters more than brand, tread pattern, or price.

ST (Special Trailer) Tires

ST tires are purpose-built for trailer use. They have stiffer sidewalls than passenger or LT tires — this stiffness is intentional. A stiff sidewall resists the lateral flex that occurs when a trailer sways or corners. Trailer sway and blowouts are frequently connected: a softening sidewall (from heat, overload, or under-inflation) allows lateral movement that amplifies sway oscillations. ST tires are designed to minimize this.

ST tires are also speed-rated conservatively. Most are rated for a maximum of 65 mph, though some newer ST tires carry ratings up to 75 or 81 mph. Exceeding the speed rating generates heat inside the tire faster than it can dissipate, which is the primary cause of trailer tire blowouts on highway trips.

ST tires should not be used on a tow vehicle’s drive or steer axles. The stiff sidewall and conservative handling characteristics that make them ideal for trailers make them dangerous on vehicles that need to steer and brake.

LT (Light Truck) Tires on Trailers

LT tires are sometimes used on trailers, particularly utility trailers and flatbed trailers where tire selection is limited. LT tires have softer sidewalls than ST tires and are designed for a vehicle that steers and drives. On a trailer, the softer sidewall allows more lateral flex during cornering and sway events, which is generally considered a disadvantage for trailer stability.

The advantage of LT tires is higher speed ratings — typically H-rated (130 mph) or higher. If you frequently drive over 65 mph and cannot find a properly-rated ST tire for your trailer, a well-matched LT tire at the correct load rating is preferable to an overloaded or under-rated ST tire. But this is a compromise, not a recommendation.

Reading the Sidewall: What the Numbers Mean

Every trailer tire has a sidewall code that contains all its critical specifications. A typical trailer tire code looks like this: ST225/75R15 Load Range E. Here is what each component means.

ST — Special Trailer designation. If you see P (Passenger) or LT (Light Truck) here, the tire was not designed for trailer use.

225 — Section width in millimeters. The width of the tire from sidewall to sidewall when mounted and inflated to spec.

75 — Aspect ratio. The sidewall height as a percentage of the section width. A 75 aspect ratio means the sidewall height is 75% of 225mm = 169mm. Lower aspect ratios mean shorter, stiffer sidewalls.

R — Radial construction. Nearly all modern trailer tires are radial. Bias-ply tires (no R in the code) are still available for older trailers but are generally considered inferior for highway use.

15 — Wheel diameter in inches. Must match your trailer’s wheel size exactly.

Load Range E — This is the ply rating equivalent and determines maximum load capacity and recommended inflation pressure. Load Range C = 6-ply equivalent, D = 8-ply, E = 10-ply, F = 12-ply. Higher load range = higher capacity and higher required inflation pressure.

Load Range and Inflation Pressure

Trailer tires are designed to operate at or near their maximum inflation pressure, unlike passenger car tires which are inflated below their maximum. This is counterintuitive to many owners but is correct. Running a Load Range E trailer tire at 80 psi (its rated max) is right. Running it at 60 psi because “it feels too hard” is wrong — and dangerous.

Under-inflation is the leading cause of trailer tire blowouts. A tire that is 20% under-inflated generates significantly more heat due to sidewall flex. On a hot day at highway speed, that heat accumulates rapidly and can cause catastrophic failure. Always check trailer tire pressure before every trip, when the tires are cold (driven less than one mile at low speed).

The correct pressure for your specific tire is the maximum pressure listed on the tire sidewall — not the pressure in your truck owner’s manual, not a “feels right” number. If the sidewall says 80 psi max, run 80 psi cold. Check it with a quality dial or digital gauge, not a stick gauge.

Load Capacity: How to Make Sure Your Tires Are Rated for Your Trailer

Every tire has a maximum load rating listed on the sidewall in pounds (or kilograms). To calculate your required per-tire load rating, take your trailer’s gross vehicle weight rating (GVWR) and divide by the number of tires. For a single-axle trailer with two tires and a 7,000 lb GVWR, each tire must be rated for at least 3,500 lb.

Always leave a margin. If the math says 3,500 lb per tire, choose a tire rated for at least 3,700–4,000 lb. This buffer accounts for uneven load distribution, road impacts, and the fact that your trailer’s GVWR represents maximum allowable load, not average load.

Tandem axle trailers divide the load across four tires, which makes per-tire load math more forgiving — but do not assume this means you can under-rate the tires. If one tire on a tandem axle is underinflated and carrying more than its share, it can blow even if the other three tires are fine.

Speed Rating and Highway Driving

Most ST tires are rated for 65 mph maximum. If you drive 70 mph or more on the highway — as most people do — you are exceeding the speed rating on a standard ST tire. The consequence is not immediate failure, but it accelerates heat buildup and tire wear. On a long trip at sustained highway speed in summer heat, this margin disappears quickly.

Some manufacturers now produce ST tires with higher speed ratings — 75 mph (M-rated) and 81 mph (N-rated) — marketed specifically for towers who travel at highway speeds. These cost more but are a worthwhile investment if you regularly tow long distances. Look for tires marked with a speed symbol on the sidewall or check the manufacturer’s specification sheet for the actual speed limit.

Tire Age: The Hidden Danger

Trailer tires age even when they are not used. The rubber compound degrades from UV exposure, ozone, and temperature cycling regardless of tread depth. A tire that looks fine visually may have cracked or deteriorated internally. The general industry recommendation is to replace trailer tires every five to seven years regardless of tread condition, and to inspect annually for sidewall cracking, dry rot, and delamination.

The manufacture date is molded into the tire sidewall as a four-digit DOT code — the last four digits of the DOT number. The first two digits are the week, the last two are the year. A code reading 2421 means the tire was made in week 24 of 2021. If your trailer tires are approaching six or seven years old, replace them before your next long trip regardless of how they look.

📖 New to towing? Start with our structured Beginner Towing Guide — organized from basics to advanced, all in one place.

Learn More with TowPro Academy

Ready to master every aspect of safe, confident towing? The full TowPro Academy towing course walks you through hitching, weight distribution, braking, backing up, and real-world road handling step by step — so you can hit the road prepared and tow with total confidence.

Frequently Asked Questions About Trailer Tires

How often should I replace my trailer tires?

Replace trailer tires every five to seven years regardless of tread depth, since the rubber degrades from age, UV exposure, and heat cycling even when tires look fine. Check the DOT date code on the sidewall and inspect annually for sidewall cracking or dry rot.

What’s the difference between ST and LT tires on a trailer?

ST (Special Trailer) tires have stiffer sidewalls built specifically to resist the lateral flex that causes trailer sway, and are the correct choice for nearly all trailers. LT (Light Truck) tires have softer sidewalls designed for steering and braking, and are only a reasonable trailer substitute if you need a higher speed rating than your ST option offers.

What tire pressure should I run in my trailer tires?

Run the maximum cold inflation pressure listed on the tire sidewall, not the number in your truck’s manual. Trailer tires are designed to operate near their max pressure, and under-inflation is the leading cause of trailer tire blowouts.

How do I know if my trailer tires are rated for my trailer’s weight?

Divide your trailer’s GVWR by the number of tires to find the minimum required load rating per tire, then choose tires rated at least a few hundred pounds above that number for margin. Check the load rating stamped on the sidewall against that calculation before every tire purchase.

Read Next

• Pre-Trip Towing Checklist: What to Check Before Every Trip
• What Is Trailer Sway and How Do You Stop It?
• What Is GVWR? Gross Vehicle Weight Rating Explained
• Towing Capacity: Complete Guide
• Towing Glossary: Every Key Term Defined